Installation Guide

Assemble door panel
1.Rotate to disassemble the rollers into main part and thread cap.
2.Cushioned with bottom protective foam, lift door panel up, assemble rollers main part
against front of door, rotate the thread cap to tightening thread from back of glass.
3.Use Allen key to adjust rollers eccentric structure to the highest state.
(Rollers with +-1.5mm eccentric adjustment for door panel height )
Then use allen key to fasten the thread cap.
1116
Use hexagonal screws to
locking rollers against glass
Use hexagonal
screws to adjust
eccentric structure
to change glass
height