Instructions / Assembly

Suggested Tools and Materials：
Installation Steps:
Cross Screwdriver
Attention: DO NOT use adhesives or adhesive sealants to install this sink.
Clean Cloth Silicone Sealan
1. Verify the cabinet clearance. 2. Clean the bottom of the
countertop and the edge of
the sink.
3. Install the clamp loosely. 4. Plenty of enough silicone
sealant around the surroun-
ding area.
5. Position the sink under the
opening. Fix the sink in place
and rotate each clamp to the
side. Tighten the clamp quickly
to secure it.
6. Wipe off the excess sealant
immediately.
7. Complete the installation
of faucet and drain.
8. check all connections for
leaks when running water
into the sink.
[e-mail]