User's Manual

Troubleshooting
1. No indication of charging is shown.
If the Headset battery that is empty or has not been used for a long time, it may take a couple minutes for the
Headset indicator to show charging status with a steady red light.
2. If you cannot connect the Headset to your phone.
- Make sure that the Headset is switched on and paired with your phone.
- Make sure that Bluetooth feature is activated on your phone.
- Check that the Headset is within a maximum of 10 meters of your phone and that there are no obstructions,
such as walls, or other electronic devices between the Headset and the phone.
Product maintenance
-Keep the Headset dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that
will corrode electronic circuits.
-Do not use or store the headset in dusty, dirty areas. It moving parts can be damaged.
-Do not store the headset in hot areas. High temperatures can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
-Do not store the headset in cold areas. When it warms up, moisture can form inside, which may damage
electronic circuit boards.
-Do not attempt to open the headset. Which will render the warranty invalid.
-Do not drop, knock or shake the headset. Rough handing can break internal circuit boards.
-Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the headset.
-Do not paint the headset. Paint can clog the moving parts and prevent proper operation.
Children
Keep all accessories out if the reach of small children.
Battery Information
New batteries
For first time use plus the adapter into the Headset and charge it at least 3 hours until the red indicator turns
off.