User's Manual

To reject a call
1. When you receive a call, the headset will be rings and the blue LED fast flashes 3 times in each 3
seconds.
2. If you want to reject this call, please press and hold main function button 2 seconds until you hear a long
beep through headset.
To redial the last dialing number
1. When the headset in the stand by mode
2. Long press volume up or volume down button for 2 second, the headset will redial the last call number
automatically.
To mute the headset
1. When you during a call, if you want to mute the conversation, you can press the volume up or volume
down button.
2. If you want to resume the conversation, press the volume up or volume down button.
To transfer a call
You can transfer a current call directly to your phone. Press for 3 to 4 seconds the main function button
during the call
★ Not all the Bluetooth phones support this feature. If it is the case with your phone, pressing
the main button may end the call and not transfer it to the phone.
Connect with a PC or PDA
You are allowed to connect the Headset with a Bluetooth enabled PC or PDA that is with Audio Gateway
Profiles supported. Please refer to the user manual of your Bluetooth enabled PC or PDA for a setup
information.