User's Manual

Using the headset
Making and Answering/Ending Calls
After being paired with your mobile phone, you can use the headset to make and receive calls. The headset
can be used with voice dialing if your phone supports this feature. For detailed operation on voice command,
please refer to your mobile phone user manual.
Answering/Ending Calls
When an incoming call is received, you can hear the ring tones through headset speaker, and the blue LED
fast flashes 3 times in each 3 seconds. To answer/end call:
1. When the Headset rings, press the main function button to answer.
2. If needed, adjust the volume. Press the volume up button to increase the volume, press the volume
down button to decrease the volume.
3. If you want to end the call, press the main function button for 3 seconds, or do nothing. After 10
seconds, the Headset will automatically disconnect.
Making Calls
There are two ways to make a call using the Headset: Using the dial pad of mobile phone and Voice dialing:
Using the Dial Pad of mobile phone
To use the dial pad on the mobile phone, dial the phone number. You may hear the dialing tones through
headset. After connected, the conversation will be carried by the Headset.
Using Voice Dialing
If the mobile phone supports voice dialing function
1. Press the main function button of headset
2. After 2 seconds and will heard a beep from headset
3. Say the name of the person to be called, and the phone number will be dialed automatically by phone.
4. If you want to cancel this voice dialing call, please press main function button 1 second.
★What is Voice Dialing?
Voice dialing is some of mobile phones feature. This can provide user speak a name to dial a number instead
of entering a number manually or choosing it from the phone book.
With speaker-dependent, voice dial entries must be explicitly created by speaking and record the name. The
phone will respond to recorded names, and usually only when spoken by the same person who recorded
them.
With speaker-independent voice recognition, no recording is required. When the name spoken by user and
the phone will automatically find out the spoken name with the closest name entered in the phone book.