Owner's manual

OCX510 10 MAR 2003 PAGE 1
Information is subject to change without notice. SmartStack is a trademark of Horner APG, LLC.
1 SPECIFICATIONS
INPUT
Inputs per Module 16 isolated Minimum ON Current 1mA
Isolated Commons
per Module
3 Maximum OFF Current
200µA
Input Voltage Range 12/24VDC OFF to ON Response 1ms.
Peak Voltage 35VDC Max. ON to OFF Response 1ms.
ON Voltage level Min. 9VDC
OFF Voltage level Max. 3VDC
Input Impedance
> 10K Ohms
Isolation between
Common and Ground
500VDC
OUTPUT
Outputs per Module
12 relay
Maximum Load current
(resistive) per
output
3A
Isolated Commons
per Module
4
Maximum Inrush Current
5A
Output Type Relay Minimum Load None
Coil Voltage
20-28VDC
Isolation (Channel to
Channel and Channel to
Common)
500VDC
Contact Voltage
250VAC / 30VDC Max.
Maximum Leakage
Current
5µA
ON Voltage drop 0.2V Max.
General Specifications
Required Power
(Steady State)
230mA @ 24VDC
UL
Required Power (Inrush) 770 mA @ 10ms.,
24VDC
CE
Please refer to Compliance Table located at
http://www.heapg.com/Support/compliance.htm
Relative Humidity 5 to 95%
Non-condensing
Terminal
Type
Spring Clamp, Removable
Operating Temperature
0° to 50° Celsius
Weight 9.5 oz. (270 g)
MAN0574-01
Mixed I/O Module
HE500OCX510
12/24 Vdc In, Positive/Negative Logic
3A Relay Out
Mini OCS/RCS