User Manual

CH.5 15 MAR 2003 PAGE 51
MAN0305-04
If a different controller is installed, select the MiniOCS / MiniRCS by double-clicking on the box (or press
the top Config button) and select the desired controller from the pull-down menu.
Figure 5.3
Note: The configuration examples in this chapter depict the MiniOCS, but the procedures also apply to
the MiniRCS.
Using pull-down menus, select either a network version of the MiniOCS / MiniRCS (MiniOCS / MiniRCS
– CsCAN) or a non-network version (MiniOCS / MiniRCS – No net). Then, select the MiniOCS /
MiniRCS model that is going to be configured. A description of the selected model is provided on this
screen. Press OK.
2. The following screen appears.
Figure 5.4