Owner's manual

CH.1 MAN0892-03-EN
February 25, 2010 Page 10 of 109 # 1039
• Make sure the unit is turned OFF before making connection to terminals. Make sure all circuits
are de-energized before making connections.
• Before each use, inspect all cables for breaks or cracks in the insulation. Replace immediately if
defective.
1.2 Grounding
Grounding is covered in various chapters within this manual.
• For grounding specifications and testing for a good ground, refer to section 4.2
• For Panel grounding, refer to section 4.3
1.3 CE Compliance
To check for compliance and updates, visit our website at:
http://www.heapg.com/Pages/TechSupport/ProductCert.html