horn hill USER MANUAL Smart Deadbolt Lock LT Please Read User Manual Carefully before Installation HELS-AM-BLICKIT H BUS-AM-BLICHUB-KIT
TABLE OF CONTENTS AFTER-SALES CONTACT INFORMATION SAFETY CAUTION PRODUCT DETAILS Package Included Product Overview Specifications GETTING STARTED INSTALLING THE SMART LOCK install the Deadbolt install the Strike Plate install the Front Pone install the Mounting Plate Install the Back Panel Confirm It hus been Installed Correctly SETTING UP THE SMART LOCK Download TT Lock APP Pair Your Phone with Smart Lock Pair the Lock with the Gateway Pair the Lock with Alexei Pair the Lock with Google Assistant BASIC OPE
AFTER-SALES CONTACT INFORMATION ab The lock contains gateway, please contact: ® E-mail © Toll Free: (858) 988-5989 {Ava liable from in Pacific Time, you con follow voice prompts to solve common problems of other times.
¥ PRODUCT DETAIL Package Included ] Deadbolt #1 } Front Anal #1 satin touting Plate *1 : saris Deadbolt Screw ” toe SS | p— Back Pane fro 1 : Keys oo ) Screws Note: The number marked oboe is the number of screws required for Installation, and the extra screws In the package ore Spore screws, <02>
J GETTING STARTED 1. Installation Video Link: 2. Prepare Door for Installation A. Make sure that the following criteria ars met so that the Smart Lock con be installed properly: Check the door status. Mike sure the door from is aligned with the door. @ There are no obstructions stuck in the door frame. @ Leave enough space for the deadbolt to extend into the door frame when the door is locked. B.
INSTALLING THE SMART LOCK Step 1: Install the Deadbolt 1. Measure your door's backseat dimension: whether iris 2%" / 70mm or 271 60 mm. if your doors backseat turn the foe plate 90° and pull to extend. 2. Insert the deadbolt into the door from and make sure the word *UP* faves up as indicated on the deadbolt.
Step 2: Install the Strike Plate Screw into the door frame Step 3: Install the Front Panel 1.
2. Rotate the lock spindle ond keep it horizontal, , 3, Route the IC wire connected on the front pane! under the deadbolt, Align the spindle with the center hole of the deadbolt, ond insert it into the center hole.
4. After installed the front panel, rolling the spindle to test If it could work with deadbolt or not. If not, toke out the front panel and roll the spindle around 30 degree ond try to Install again until it could work with the deadbolt. Step 4: Install the Mounting Plate 1. Route the 10 wire through the mounting plate. 2. Place the 1C wire as shown in the picture to ovoid the cable out of control.
&. Fix the mounting plot into the interior door frame using the mounting plate screws, Step 5: Install the Back Panel 1. identify Your Door Handing 2.1f you open the door from the right, the small pick {toggle bunion} In the buck panel should switch to "RY, and the left side should switch to "L.
3. Right-handed door: make sure that the status of the deadbolt is unlock and adjust the knob to the vertical direction. Left-handed door: make sure that the status of the deadbolt is unlock and adjust the knob to the horizontal direction. 4. Connect IC wire to the wire connector.
E. Turn the rear knob to check whether the deadbolt is retracted. if the deadbolt work smoothly, tighten screws, If it doesn't work, please go back to step 5-3, 7. insert 4 AA batteries into the battery compartment matching the polarity indicated.
Step 6: Confirm It has been Installed Correctly 1. Mike sure the knob of the back pane! con be turned normally. 2. Mike sure the keypad is work: touch keypad will lit; enter the initial password 123456# to unlock, press and hold "#7 to lock, {if the locking and unlocking ore backwards, you con remove the lock and return to the step £-2 to switch the toggle button} 3.
Pair Your Phone with Smart Lock 1. Please make sure the phone Is near the lock ond turn on the phone Bluetooth, 2. Click add lock choose “All Locks”, %. Touch the keypad to wake it up when adding o smart lock to the TT Lock. 4, Char you see the blue "+ button, you con add it then name your lock, ML deli 5. If the lock cannot be added to the opp (ol gray even if touch the keypad), you should reset the smart lock (Please see "How to reset the lock” on gaps 18).
5. Mobile phone sound gateway should use the same WHF when connecting. &.
Pair the Lock with Alexei (Need the gateway) : Note: You need to add "+1" before your TT Lock accountant: If your user i Nome is phone number "8889885989", please enter Video Link: httpsi/fyoutube/PurMK4G2rFA
Pair the Lock with Google Assistant {Need the gateway/Just pissed the app test, it may not be very stable} 1. Mike ruses you have Installed Google Home APP and gateway. 2. Click the button on the upper left of the app to setup device. &. On setup device page, choose "Works with Google” to manage accounts page. 4. Search for "ScienerSmart® and enter your TT Lock account on the authorize pug. 5. Set Google Home Security Code In TT Lock APP.
8. When authorized admin, vou can choose permanent, Clause make sure that the recipient has already downloaded the TT Lock app and has their own account. If the recipient's account is phone number, please check their account, whether there is *1" before the phone number. ©. if you have the gateway, please turn on "Allow Remote Unlocking” so that recipient can remote control the lock 3.
6. Auto Lock You can turn on this function in the settings and set the automatic lock time you wont. After the setting is successful, please unlock It once. Unlock Flock the Door 1. Via the Keypad Unlock: Enter the password ond touch the # key to confirm; Lock: Only press ond hold the # key for 2s. 2. Via the TT Lock Unlock: Touch the main lock button to unlock {touch the small lock button to unlock remotely); Lock: Press and hold the main dock button to lock.
3, After restart within 8s, please press ond hold the deadbolt button for aver Bs until hear ‘did!’ sound. It means reset successfully after hear "dido sound, 4. if not works, please take the lock apart and find the reset button in the front panel, 5 5. Press and hold the reset button around 3s until hear the ‘did’ sound. App Reset: Settings Transfer Lock{s} -Select Lock -Personal--Move Faultfinding Locks to Trash.
¥ TROUBLESHOOTING 1. Why are ofl operations reversed? When lock, it unlocks or wham unlock, it docks? A Please go bok to step 5-2 on page 9 to check whether the direction of the toggle button is comet 8. Open the TT Lock app--Click "Firmware Update™ fo confirm whether It has been updated to the latest version (5.5.1.
%. Why can't the lock be controlled remotely? A. Please make sure that you can unlock flock via the Bluetooth and your phone is connected to the gateway. Tum on the "Remote Unload in TT Lock touch this small con a to remote unlock) B. Please open the app and click the upper left three bros silicone ‘gateway’ to check if it is online and the signal {s strong. ©, if yes, please toke out one battery for 3s ond put it back to re-start the lock. And then try it again.
J CUSTOMER SERVICE an The lock contains gateway, please contact: ® E-mail: © Toll Free: (888) 988-5989 {Ava liable from in Pacific Time, you con follow voice prompts to solve common problems of other tames} The lock doesn't contain a gateway, please contact: @) E-mail: kriset@ipioxcom © Toll Free: (B88) 988-5816 {Available from in Pacific Time, vou can follow cove prompts to solve common problems at other times.