Owner’s Manual RAPiD SAFE ™ Item No.
READ THIS FIRST Warning: NEVER store a loaded firearm in the Hornady Security™ RAPiD™ safe under any circumstances. The risks associated with storage of a loaded firearm include, but are not limited to, unintentional discharge upon insertion or removal of the firearm. Unintentional discharge may result in bullet and safe fragments dispersing in multiple directions, which may cause serious injury or death. Hornady Security™ is not liable for any misuse of the RAPiD™ safe. Warning: No safe is entirely secure.
Table of Contents Warnings and Important Information........................................................ Page 2 Items Included........................................................................................... Page 3 Setup and Operation.................................................................................. Page 4 Warranty.................................................................................................... Page 9 Product Registration and Service..........................
RAPiD™ Safe Setup and Operation Congratulations on purchasing the technologically advanced RAPiD™ safe. You have taken a significant step in securing the safety of your handgun. To achieve the best experience with your RAPiD™ safe, please read all instructions carefully, and understand its operation. After the RAPiD™ safe has been taken out of the box, please check to be sure the circular (barrel) key fits and unlocks your RAPiD™ safe (See page 7 for Manual Lock information).
RFID Tags Your RAPiD™ safe includes five (5) different RFID tags, including: • 3 Bracelets (M, L, XL) • 1 Key Fob • 1 Card The safe’s system can only store up to two (2) different tags at a time. Only two tags can be programmed for use. The remaining three tags will be inert, but can be circulated as one of the programmed tags if you choose to use them later, i.e., you can program two bracelets, or one bracelet and the card, but no more than two tags may be programmed for use at any given time.
Battery Power Mode When the RAPiD™ safe is unplugged, and is operating on battery power, you must press the ENTER key to activate system. Pressing the ENTER key causes the system to achieve ready status. This includes RFID tag reading and keypad operation. For example: To open your safe with an RFID tag, while the system is running on battery power, first press the ENTER key to bring it to ready status. Place your RFID tag approximately 1/2" over the RFID reader to open the safe.
Manual Lock The mechanical key lock is located under the keypad panel. To manually unlock the RAPiD™ safe, carefully remove the keypad panel by pushing the locking tab toward the “H” and then lifting up, carefully protecting the attached wires. Press the safe lid down while turning the key to unlock the unit.
Removing & Reinstalling the RAPiD™ Sleeve Locked Lever The RAPiD™ sleeve accommodates most 5-inch pistols, and 4-inch barreled revolvers. Removing the RAPiD™ sleeve can accommodate larger handguns or other valuables. To remove the sleeve, lift the levers located on each side of the sleeve, and pull it out. Reinstalling the sleeve is just as simple. Make sure the levers are up and push the sleeve in place, aligning the notches with the bar. Press the levers down to lock the sleeve in place.
RAPiD™ Safe Limited Warranty Hornady Security™ warrants the RAPiD™ safe will, in normal use and service, be free from defects in workmanship or materials for one (1) year from date of purchase.
Product Registration and Service You must register your RAPiD™ safe in order to obtain Warranty Service. Simply complete and return the enclosed product registration card or submit through our website by going to hornady.com/warranties To Receive Warranty Service In order to report a warranty claim, call Hornady Security™ at 800-338-3220 to request a return authorization number. Returns will not be accepted without prior return authorization by Hornady Security.
Align corner of template to the front right corner of safe.
P.O. Box 1848, Grand Island, Nebraska 68802-1848 308-382-1390 • 800-338-3220 • Fax: 308-382-5761 www.hornady.com • webmaster@hornady.
