User guide

AUTO OFF:
This unit comes with an auto-off feature to conserve battery power.
The scale will automatically turn off after approximately four minutes of
inactivity.
CAUTION:
Do not place more than the capacity of the scale on the weighing platform.
Abuse of this type can cause damage to the scale and void the warranty.
This scale is a sensitive electronic instrument. Avoid vibrations, strong
electrical or magnetic elds, and rapid changes in humidity or temperature
as they can adversely affect accuracy.
CARE AND MAINTENANCE:
• Avoid lengthy exposure to extreme heat or cold. To achieve optimum
functioning, allow this unit to acclimatize.
• Allow scale a minimum of thirty seconds to warm up before calibration to
allow internal components to stabilize.
• Keep this product clean. Dust, dirt, and moisture can adversely affect the
reliability and accuracy of this scale.
• Vibrations, air currents and proximity to other electronic equipment may
affect accuracy of this product. Avoid disturbing the environmental conditions
when weighing. Be sure weighing is done with scale on a at surface in a
sheltered area.
• Handle with care. Although this product is durable, rough treatment may
permanently damage the internal sensor.
Hornady Electronic Scale
Instruction Manual
Model GS-1000
Congratulations on your selection of a quality Hornady product.
With proper care and use, this product will provide years of
dependable service. Hornady is committed to providing products
that t your needs, manufactured to the highest of quality standards.
If you have any comments or suggestions concerning this product
please mail them to:
Hornady Manufacturing
P.O. Box 1848
Grand Island, NE 68802-1848 USA
www.hornady.com
Please read all the operating instructions to ensure the best performance
from your Hornady Electronic Scale.
CAPACITY/ACCURACY:
1000grain/65grams x 0.1grain/0.01gram
POWER SOURCE:
Four “AA” alkaline batteries or 120 Volt AC adapter
(output DC 6V 100mA)
BATTERY INSERTION:
1. Turn scale upside down and locate battery compartment cover.
2. Push tab toward compartment cover. Lift cover off.
3. Insert four “AA” alkaline batteries; ensure that battery polarities
are aligned properly.
4. Replace battery compartment cover and secure.
5. The scale is now ready for use.
Note: Do not use excessive force in removing or replacing battery
compartment cover.