Operating Instructions and Installation Instructions

ENGLISH
CONTENTS PAGE
A Supplied Items 2
B Required Tools for Installation 2
1 Important Notes 7
1.1 Important safety instructions 7
1.1.1 We shall be exempt from our warranty obligations
and product liability in the event that ... 7
1.1.2 Checking the door / door system 7
1.2 Important instructions for safe installation 7
1.2.1 Prior to installation 7
1.2.2 In carrying out the installation work 7
1.3 Warnings 8
1.4 Maintenance advice 8
1.5 Information on the illustrated section 8
Illustrated Section 18-30
2 Installation Instructions 38
2.1 Required clearance for installing the operator 38
2.2 Door latches on an up-and-over door 38
2.3 Door latches on a sectional door 38
2.4 Up-and-over doors with a forged iron door handle 38
2.5 Central locking on a sectional door 38
2.6 Off-centred reinforcement profile on a sectional door 38
2.7 Tensioning the drive belt 38
3 Putting into Service / Connecting Additional
Components / Operation 38
3.1 Establishing the door's end-of-travel positions
by installing the limit stops 38
3.2 Notes on work involving electrics 38
3.3 Putting the operator into service 38
3.3.1 Deleting the door data 38
3.3.2 Programming the operator 39
3.3.3 Setting the maximum forces 39
3.4 Other adjustment options 40
3.5 Connecting of the additional components 40
3.5.1 Connecting the remote control 40
3.5.2 Connecting external IMPULSE buttons to start or
stop travel cycles 41
3.5.3 Connecting an OFF-switch or a wicket door
contact to halt and / or switch off the operator 41
3.5.4 Connecting a photocell or closing edge safety
device 41
3.5.5 Connecting to the options relay 41
3.6 Notes on operating the garage door operator 41
3.6.1 Normal operation 42
3.6.2 Operation following actuation of the mechanical
release 42
3.6.3 Signals from the operator lighting 42
3.6.4 Error messages / diagnostic LED 42
4 Terms and Conditions of the Warranty 43
5 Technical Data 44
Copyright.
No part of this instruction manual may be reproduced
without our permission.
Subject to changes.
6
06.2004 TR10A014 RE