Operating Instructions and Installation Instructions

ENGLISH
Service rendered
For the duration of the guarantee we will eliminate all
product defects that are proven to be attributable to
material or manufacturing faults. We pledge to provide
free of charge and at our discretion to replace the de-
fective parts with a non-defective one, to improve it, or
to reimburse for a reduction in price.
Excluded are damages due to:
- improper fitting and connection
- improper commissioning or operating
- external influences, such as fire, water, abnormal
weather conditions
- mechanical damage due to accidents, dropping, jolting
- negligent or deliberate destruction
- normal wear and tear or deficient maintenance
- repair by non-qualified persons
- use of non-original parts
- removal or making unrecognisable the serial number
Replaced parts become our property.
5 Technical Data
Power supply: 230/240 V, 50/60 Hz
standby approx. 4,5 W
Protection category: For dry rooms only
Automatic cut-out: Automatically programmed
separately for both operational
directions.
End-of-travel Self-learning, non-wearing, since
cut-out/Force limit: no mechanical switches are
used. Additionally integrated
excess travel stop of approx.
45 s. Automatic cut-out read-
justs itself during each travel
cycle.
Rated load: 150 N
Push and pull force: 500 N
Short-time peak load: 650 N
Motor: DC motor with "Hall" sensor
Transformer: With thermal overload protection
Connection: Connection technique without
screws for external equipment
with safe low voltage of 24 V DC,
e.g. internal and external buttons
for impulse control.
Special functions: - Operator lighting, 3 minutes
light factory setting
- STOP/OFF switch can be
connected
- Photocell or closing edge safety
device can be connected
- Options relay for warning light,
additional external lighting
Quick release: In the event of a power failure,
actuated from the inside via a
pull cord
Remote control: 2-button hand transmitter HS 2
and separate receiver.
Universal fitting: For up-and-over and sectional
doors
Door speed: Approx. 14 cm/s (depending
on size and weight of door)
Airborne noise
emission Garage
door operator: ≤ 70 dB (A)
Boom: Extremely flat (no more than
30 mm) with integral door secu-
rity kit and maintenance-free,
patented toothed belt with
automatic belt tensioning.
Application: Exclusively for garages in the
domestic sector. For easy-moving
up-and-over and sectional doors
with a door area of up to 10 m
2
Not suitable for industrial /
commercial use.
Parking spaces: Suitable for a maximum of 2
parking spaces
44
06.2004 TR10A014 RE