Owner's Manual

Revision - 4 of 17
SECTION 1 – Tools Required
 Socket wrench set
 Combination wrench set
 Wire cutters
In addition to the above items, you may need shop supplies such as electrical tape, wire
ties, thread locking compound, etc.
SECTION 2 – About your Audio Mini sound system
2.1 Applicable Year Models:
This Audio Mini off-road sound system is designed to fit the following Wolverine
models:
 2021-2022 Wolverine RMAX2 1000 (all versions)
 2021-2022 Wolverine RMAX4 1000 (all versions)
 2021-2022 Wolverine X2 850 (all versions)
 2021-2022 Wolverine X4 850 (all versions)
 All versions means it includes sub-models such as Sport, R-Spec, XT-R, and
Limited Edition editions.
 This system is compatible with most front windshields and roofs.
 Accessories that mount overhead near the front of the roll cage such as rear view
mirrors, wiper motors, etc. may not be compatible or may require modification.
Contact Hoppe customer service for questions.
2.2 Audio Equipment Details:
Your Audio Mini off-road sound system is powered by using
their marine series audio equipment. This equipment is designed to function in all
weather conditions with an IPX6 water resistance (powerful water jet) rating. The stereo
is specifically engineered to provide excellent sound quality and volume in an open air
enviroment so you can enjoy your music on the go.
To learn more details about your stereo system, you can access product information and
manuals for the stereo equipment here:
 KMC2 receiver:
https://www.kicker.com/kmc2
 Speakers: https://www.kicker.com/41KM604W
You can feel free to crank up the volume without much worry of harming your system.
However, it is wise to use a little common sense. If you hear any distortion, back off a
little.
Use the equalizer settings in your KMC2 receiver to adjust the settings to your
preferences.