Manualshelf

Owner's Manual

ManualsBrandsHoppe ManualsSound SystemHOPPE Off Road Sound System for Yamaha Wolverine
891011121314151617
Revision - 15 of 17
14. Connect the chassis harness battery cables to the battery, clamping the cables on
top of any existing cables with the factory hardware. Connect the red harness wire
to the terminal with the existing red battery cable (+ 12V). Connect the black
harness wire to the terminal with the existing black battery cable (- 12V). See
Figure 15.
Figure 15: Battery cable connections.
15. Zip tie the chassis harness to the factory wire loom under the hood and at the
indicated locations on the driver’s front down tube. See Figure 16 and Figure 17.
RED TO +
BLACK TO -