Owner's Manual

Revision - 13 of 17
11. Remove the torx screw on top of the dash next to the driver’s front down tube.
Gently lift the dash panel, pull the chassis harness connector through the opening,
and connect it to the mating connector on the Audio Mini. The harness will be
secured to the inside of the cage tube at the end of the installation. See Figure 12.
Figure 12: Chassis harness routing up the front down tube.
12. Pick one of the unused accessory connectors to plug in the ignition connector
from the Audio Mini chassis harness. See Figure 13.
REMOVE
TORX SCREW
PULL CONNECTOR
THROUGH OPENING