Owners manual

F2A
1. Remove storage compartment to the
left of radio.
2. Remove connector (Fig. 1 / A) from
back of storage compartment.
3. Plug the brake control connector
into the vehicle connector (Fig. 2).
4. Plug mating end of the brake control
connector into the brake control.
5. Test all functions.
Wire to brake control by
function only. Color coding
is not standard among all
manufacturers. To ensure proper
installation, read brake control
instructions thoroughly.
47845
FIG. 1
A
FIG. 2
WIRE CODE
White wire------ Ground
Blue wire-------- Electric brake
Black wire------ Battery
Red wire-------- Stop lamp switch
1. Remove storage compartment to the
left of radio.
2. Remove connector (Fig. 1 / A) from
back of storage compartment.
3. Plug the brake control connector
into the vehicle connector (Fig. 2).
4. Plug mating end of the brake control
connector into the brake control.
5. Test all functions.
Wire to brake control by
function only. Color coding
is not standard among all
manufacturers. To ensure proper
installation, read brake control
instructions thoroughly.
47845
FIG. 1
A
FIG. 2
WIRE CODE
White wire------ Ground
Blue wire-------- Electric brake
Black wire------ Battery
Red wire-------- Stop lamp switch
1. Remove storage compartment to the
left of radio.
2. Remove connector (Fig. 1 / A) from
back of storage compartment.
3. Plug the brake control connector
into the vehicle connector (Fig. 2).
4. Plug mating end of the brake control
connector into the brake control.
5. Test all functions.
Wire to brake control by
function only. Color coding
is not standard among all
manufacturers. To ensure proper
installation, read brake control
instructions thoroughly.
47845
FIG. 1
A
FIG. 2
WIRE CODE
White wire------ Ground
Blue wire-------- Electric brake
Black wire------ Battery
Red wire-------- Stop lamp switch
1. Remove storage compartment to the
left of radio.
2. Remove connector (Fig. 1 / A) from
back of storage compartment.
3. Plug the brake control connector
into the vehicle connector (Fig. 2).
4. Plug mating end of the brake control
connector into the brake control.
5. Test all functions.
Wire to brake control by
function only. Color coding
is not standard among all
manufacturers. To ensure proper
installation, read brake control
instructions thoroughly.
47845
FIG. 1
A
FIG. 2
WIRE CODE
White wire------ Ground
Blue wire-------- Electric brake
Black wire------ Battery
Red wire-------- Stop lamp switch
1. Remove storage compartment to the
left of radio.
2. Remove connector (Fig. 1 / A) from
back of storage compartment.
3. Plug the brake control connector
into the vehicle connector (Fig. 2).
4. Plug mating end of the brake control
connector into the brake control.
5. Test all functions.
Wire to brake control by
function only. Color coding
is not standard among all
manufacturers. To ensure proper
installation, read brake control
instructions thoroughly.
47845
FIG. 1
A
FIG. 2
WIRE CODE
White wire------ Ground
Blue wire-------- Electric brake
Black wire------ Battery
Red wire-------- Stop lamp switch