User Manual

16
BELT PART #: 440012733 – TO BUY, VISIT HOOVER.COM
IMPORTANT
Rotate brushrolls manually to make sure belt is not twisted or pinched.
! !
Place new belt on motor shaft.
Position non-belt side end cap
of brushroll into pocket.
Replace belt covers and secure
by replacing all 6 screws.
1
3
5
2 4
Slip brushroll through belt. Carefully stretch belt to locate
other end cap into pocket,
making sure that the end caps
are in their correct orientation.
Maintenance
Belt Maintenance
HOW TO REPLACE
CAUTION
To reduce the risk of injury from moving parts, unplug before servicing.
! !
*in front of wheel