Operation Manual

Operation Instructions

1. Clock Setting

When the microwave oven is electrified, the LED will display "0:00", buzzer will ring once.

(1) When in waiting states, press " ",hour figures flash.

(2) Turn " " to input the hour figures.Its range is 0-23.

(3) Press " " to confirm the clock.

(4) Turn " " to input the minute figures.Its range is 0-59.

(5) Press " " to confirm.":" flashes.

Note: 1) If the clock is not set, it would not function when powered.

2) During the process of clock setting, if you press " ", the

oven will go back to the previous status automatically.

Special Instructions

1. Do not open the oven door! If it is open,the fan will continue working for 3 minutes.This is normal.

2. When "E-2" displays, which means no water or few water, the fan will continue working for 3

minutes.This is normal.

3. Do not pull out the watre tank when water level is full. If it is pulled,the water will

flow backwards,this is normal. Cause it will keep the water clean.

5. It is suggusted that you should use purified water or distilled water.

4. Please pay attention to the water level in the gutter box.

2. Microwave Cooking

Press " " the LED will display "P100 .

or turn " "to choose the power you want, and "P100", "P80" "P50", "P30",

"P10","G"..."C-2" will display for each added press. Then press

microwave power.

Example: If you want to use 80% microwave power to cook for 20 minutes, you can

operate the oven as the following steps.

Press " " for times

" " to confirm, and turn " " to set cooking time from 0:05 to

95:00. Press " " again to start cooking.

1) Press " once, the screen display "P100"."

2) Press " " once again or turn" " to choose 80%

3) Press " " to confirm, and the screen displays "P 80".