Other Document

5
EN
 Do not continue to use this
machine if it appears to be faulty.
 The tumble dryer is not to be
used if industrial chemicals
have been used for cleaning.
 Lint and fluff must not be allowed
to collect on the floor around the
outside of the machine.
 Always remove the plug before
cleaning the appliance.
 The drum inside may be very
hot. Always allow the dryer to
complete the cool down period
before removing the laundry.
 The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
 Do not install the product in a
low temperature room or in a
room where there is a risk of
frost occurring. At temperature
around freezing point the
product may not be able to
operate properly: there is a risk
of damage if the water is
allowed to freeze in the
hydraulic circuit (valves, hoses,
pumps). For a better product
performance the ambient room
temperature must be between
5-35°C. Please note that
operating in cold condition
(between +2 and +5°C) might
simply some water condensation
and water drops on floor.
Installation
WARNING
Never stop a tumble dryer
before the end of the drying
cycle unless all items are
quickly removed and spread
out so that the heat is
dissipated.
WARNING
Do not use the product if the
fluff filter is not in position or
is damaged; fluff could be
ignited.
WARNING:
Where the hot surface
symbol is located the
temperature rise during
operation of the tumble
dryer may be in excess of 60
degrees C.