HOOVER / / / \ TM m Deep m ! Cleaner AF'mB with The Easy to Use Deep SteamVac applying www.hoover.com V2 TM Deep hot tap water TM _mmi m Auto Cleaner RinseMFeature ENGLISH ,._ pp. 1-17 ESPANOL ,._ pag. 18-27 FRAN(_AIS ,._ p. 28-37 Cleaner cleans carpet and cleaning solution.
Grounding Instructions When using the following: an electrical READ ALL appliance, always INSTRUCTIONS foIIow BEFORE basic precautions, USING APPLIANCE. including A B @ @ To reduce the risk shock, or injury: • Use indoors of fire, electric only. • Use only the cleaning product. on surfaces moistened by process. Do not immerse • Connect outlet only. Instructions', to a properBy grounded See "Grounding • Do not outlets. clean • use without Do not • Do not flit (60°).
Thank you for choosing a HOOVER Contents product. Important safeguards .......... 2 Parts needed for assembly ....... 3 Assembling deep cleaner ...... 3-5 Deep cleaner description ........ 6 General operation ............ 6-8 Filling the clean water tank ... 7-8 Emptying the recovery tank .... 8 Brush speed selector ......... 7 Automatic shut-off ............ 7 How to use If you need any assistance: Visit our website at www.hoover.com.
The assembled drawing. = 1 cleaner will look like this Aj Attach upper handle Remove clean water tank (upper tank) from deep cleaner. _-- NOTE: If the cord protector (A) on back of handle should become dislodged during unpacking, make sure it is repositioned properly before continuing with assembly of your deep cleaner. With the arrow (B) on the cord )rotector pointing down, press groove (C) in the cord protector into slot in the lower handle.
;m.:] IEil Rotate top of caddy toward cleaner handle. Slide caddy down so notch (G) on caddy rests in hook (H) on cleaner. Identify the hose parts before storing hose. I. Nozzle connector end J. Solution tube Storing tools hose and Press hose, a few inches from nozzle connector end (I), into caddy. Bring hose up and over top of caddy. / ,X 71- I Press hose into opposite side of caddy. Loop hose at bottom of cleaner and press into top of hook (K).
EE[_] J Pull tool down and outward. To reposition the tool, reverse this procedure. How to reattach cover tool The tool cover is designed with a breakaway feature which allows it to snap free if it is pushed open too far. To reattach, align hinges of cover with holes on sides of tool storage area. Snap door into place.
Deep Cleaner Description The assembled 1. 2. 3.! 6-- 8_ 10-.. 11_ 16x 15_ 14 I 12 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. deep cleaner will look like the drawing.
Carrying handle The deep cleaner may also be lifted by placing a hand above the upper clean solution tank handle as shown. Automatic shut off Brush setting selector When the recovery tank (lower tank) is full the automatic shutoff mechanism will shut off the deep cleaner suction (suction will be noticeably reduced). Your 'SteamVac' deep cleaner has two agitator brush settings. At that time, the yellow float disk will rise to the top of the recovery tank lid (B).
P-,5P4 P_EI IE Carry tank to a sink. Turn tank cap counterclockwise remove cap. and Fill tank (E) (1 gallon) with hot tap water. CAUTION: Do not fill with water above 140°F (60°C). To fill detergent container (F), turn cap counterclockwise and remove cap. Replace tank cap and tighten. NOTE: Use only HOOVER detergents. They are specially formulated for use with your 'SteamVac' deep cleaner. CAUTION: Detergents Anionic and Nonionic contain Surfactants. Avoid contact with eyes and skin.
Before you begin a. Vacuum thoroughly ° For carpet, use a HOOVER vacuum cleaner with an agitator for best results. Vacuum upholstery with a vacuum cleaner with cleaning tool attachments. Use a crevice tool to reach into tufts and folds. Do not use the 'SteamVac' deep cleaner as a dry vacuum cleaner, b.
To clean nozzle If lint or other debris becomes lodged in nozzle, it can be removed for cleaning. J To replace nozzle, line up tabs (A) on nozzle with holes (B) in cleaner. Slide tabs into holes. Unplug deep cleaner from electrical outlet. Slide nozzle completely onto cleaner. Press down on nozzle to secure it. Remove both tanks as described in Fig. 2-16. With handle in upright position, tilt cleaner back so that handle rests on the floor. Replace recovery tank (Fig. 2-17).
6. Set Rinse Setting switch to WASHAutoRinse. Turn cleaner ON. How to attach attachment bare 7. To release solution, press trigger. Slowly move deep cleaner forward and backward over area to be cleaned. Water and detergent will be released on the forward stroke. A water-only rinse will automatically be released on the reverse stroke. floor Unplug deep cleaner from electrical outlet. To prevent possible leaking, remove clean water tank (Fig. 2-10) and recovery tank (Fig.
Select tool Your model includes some combination of the following tools, but may not include them all. How to attach tools / [_5E5 After using tool Drain suction hose by turning deep cleaner ON and holding nozzle up for several minutes. Do not press trigger. Unplug deep cleaner from electrical outlet. Disconnect hose and solution tube from deep cleaner, Unplug deep cleaner from electrical outlet. G.
lmnmnn A B 11. Lift tool, and position it against riser. Pull tool slowly over carpet without pressing trigger (dry stroke). 12. Overlap strokes by 1/2 inch to help prevent streaking. It is best to alternate wet and dry strokes as described above. End with more dry strokes to aid in faster drying of carpet. To avoid saturating carpet, do not use more than 4 wet strokes over any one area. Always end with dry strokes.
B D B Storage Before storing: • Empty clean water tank and let air dry Replace on deep cleaner • Unused detergent can be stored in the detergent container • Empty recovery tank, rinse tank and lid thoroughly with clean water and let air dry To replace brushes Align posts (A) on both ends of brush assembly with slots (B) in cleaner housing Make sure that the square post (C) also aligns with the square hole (D) Turn brushes slightly until post fits easily into hole Press brush assembly firmly to snap in
To obtain approved HOOVER service and genuine HOOVER parts, locate the nearest Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot) by: .checking the Service section of The Hoover Company on-line at www.hoover.com OR . checking the list of Factory Service Centers provided with this cleaner OR checking the Yellow Pages under 'Vacuum Cleaners - Household" OR calling 1o800o944o9200 for an automated referral of authorized service outlet locations (U.S. only).
HOOVER y _)son HOOVER and _ 1-03 F7426-900 HOOVER et _sont marcas registradas des marques d6posees are registered trademarks Litho USA 56518-163
