Manual

Attach the hose
Unplug carpet cleaner from electrical outlet.
¢" Place handle in upright position.
¢" The hose and tool caddy can be removed from the
cleaner if you desire.
¢" Remove hose from tool caddy.
¢" Open hose door (A) on back of carpet cleaner (Fig. 13).
,/
Align hose connector with hose and solution ports (C)
(Fig. 14).
,/ Push hose into port and lock in place.
../
%
x<
A
,/ To remove hose: Squeeze latches (D) on top and bottom
of hose. Remove hose from port (Fig. 15).
,/ Close hose door (A) tightly (inset).
SpinScrub TM hand tool
• Rotating brushes
• Use on carpet to clean
spots, small areas or
stairs
Stair/Upholstery nozzle
• Built-in brush
• Use on upholstery
Unplug carpet cleaner from electrical outlet.
,/ Slide tool onto hose. Snap tool over tab (E) on hose {Fig 18).
,/ To remove tool: Push forward and up on latch (F) {Fig. 19).
Slide tool off hose.
E
Continued -_