Manual

Empty the Recovery Tank
Unplug carpet cleaner from electrical outlet.
An automatic shut-off
device prevents the
cleaner from picking
up more dirty water
than it can hold in the
recovery tank.
You will know the tank
needs to be emptied
when:
• The amount of: dirty water has reached the
fun line [A}..
• When the motor sound rises in pitch.
• You do not see dirty solution coming up
through the nozzle.
,, The float (B) inside the recovery tank has
risen to the top of the tank.
Press the button
(C) and remove the
tank,
Release the latches
(D) on the tank cap
and remove the cap,
Empty the tank,
Replace the cap.
Secure both latches,
For ftfll suction, it is
important that the
recovery tank cap
is properly secured
before cleaning.
Remove any debris
that has collected on
the lint filter {A)on
the cleaner body,
Place the bottom of
the tank onto the
cleaner, Pivot the
top of the tank and
snap into place,
Attach the Hose
Unplug carpet cleaner fl'om electrical outleL
Placehandle in
upright position°
Remove hose from
tool caddy, Open
hose door (A)on back
of carpet cleaner_
Align hose connector
with hose and
solution ports (B].
Push hose into port
and lock in place.
To remove hose:
Squeeze latches [Q
on top and bottom
of hose. Remove hose
from port, Close hose
door tightly.