Manual

Cleaning UphoBsteW

Check fabric cleaning code°Look on the furniture manufacturer's tag

fbr a 'W' or 'WS' code, These codes indicate that it is alright to use your

carpet cleaner to clean the upholstery_ Do not use tile carpet cleaner on

upholstery marked 'S', 'X' or 'Dry Clean Only'. Fig, 5,1

Vacuum upholstery thoroughly with .your vacuum cleaner's attachments°

Jest detergent for colorfastness on a hidden area ofupholstery° Wet

a white cloth or paper towel with some detergent_ Gently rub onto a

hidden area of upholstery. Wait ten minutes_ Blot with white clofll or

paper towel and check for color transfer,.

Pretreat spots and stains with Hoover Spot and Stain Spray, Spray spot

or area with Spot and Stain Spray° Then proceed with the next cleaning

steps. For stubborn spots or stains, refer to the stain guide included

with your cleaner. Fig. 5.2

Fill solution tank with hot tap water and proper amount of Hoover

detergent (see page 5) Use only Hoover brand detergents in your

carpet cleaner. Other brands may damage the carpet cleaner. Fig° 53

6. Attach hose and tool (see pages 7-B)_ Fig_ 5r4

10.

Place handle in fult upright position. Turn cleaner OK

Squeeze and hold trigger (A)to release cleaning solution_ Gently

press tool into fabric and slowlypull the tooI over the fabric Fig. 5.5

Let go of trigger and pull tool over same area to pick up dirty solution

without putting down more solution..Continue using dw strokes until

you see only a little solution coming up through the tool

Do not make the uphoMery too wet! Use no more than two strokes

while releasing solution.. Always Follow with dry strokes - the more

the better

Listen carefully! When the motor sound changes (rises in pitch}, the

recovery tank needs to be emptied. When water has reached the

Fullline in the recovery tank, the cleaner will NOTpick up dirty

solution._

Allow upholstery to dry, Avoid using upholstery until it is dpt.

Increased air circulation (open doors, turn on fans, etc) will help

upholstery dry thoroughly to prevent the growth of'mold or mildew,