Manual

D
Attach hose rack
[_ Remove tool and taped screw from
rack.
Insert projections on rack into slots on
back of cleaner,
i_ Slide rackdown into place.Insert
screwat (0) and tightenwith a
Phillipsscrewdriver.
Storing hose & tools
i_ Store hose on rack by first position-
ing hose in front section of clip,
[_1 Then continuewrappinghose as
shownsnappingend of hosecon-
hector intoclip.
I_1 Positionstair/upholsteryor utility
nozzle(somemodels)in holderat
baseof cleanerand snap it intoplaceas
shownat arrow.
[]Slide bare floor attachmentinto
holderas shown.
For Ultra models
_The hand tool is
powered shipped
in a plastic bag for protection.
Remove the bag before using the tool
by first opening tool door.
To remove tool (A), pull it down and
outward.
To reposition the tool, reverse this proce-
dure.
For Plus/'Runabout'
models
To store stair/upholstery nozzle (B), open
tool door, place nozzle in bracket and fit
it securely into position. To remove,
reverse this procedure.
How to reattach tool
cover
he tool cover is designed with a
break-away feature which allows it
to snap free if it is pushed open too far.
To reattach, align hinges of cover with
slotson sides of tool storage area.
Push cover down to secure in place.