Manual

Lifttool,and positionit againstriser.
Pulltoolslowly overcarpetwithout
pressingtrigger(drystroke).
It is bestto alternatewet and dry strokes
as describedabove. End with moredry
strokesto aid in faster dryingof carpet,
Overlapstrokesby 1/2 inchto help pre-
vent streaking.
To avoid saturating carpet, do not use
more than 4 wet strokes over any one
area. Always end with dry strokes.
If additionalcleaningis necessary,wait
untilthe carpetis completelydry before
usingthe tool again.
Emptyrecoverytankwhen the motor
sound becomeshigher pitched and
there is a lossin suction(see=Automatic
" shut-off',page 7)
When finii cleaning, follow "After
cleaning"instructionson page9 and
'After usingtool'instructionson page11.
Read "Before you begin deaning"
Instructionson page 9.
Besure to checkthe cleaningcode on
your upholstery.Use your HOOVER
'SteamVac' deep deaner only on
upholstery marked_ or W/S".
Placehandlein uprightposition.
Agitator brushes will not rotate while
handle Is In upright position.
Fill cleansolutiontankwith HOOVER
Carpet/UpholsteryDetergentaccording
to instructionson pages7 and 8. Attach
toolto end of hose.
Do not pointtools toward people or
pets.
Dry hands and plug deepcleanerintoa
propertygrounded outlet.
Turndeep cleaneron.
_-I Gentlypressthe tool(A) or(B) onto
the fabric. Pressthe trigger and
slowlypullthe nozzleoverthe fabric,
Overlapstrokesby 1/2 inchto helppre-
vent streaking,
Makeadditionalstrokeswithoutpressing
thetriggerto removemoremoisture.
To cleanin cornersor creases,lift the
toolone-halfinchfrom thefabric and
pressthesolutiontrigger,
Vacuumupthe solutionwiththetool
withoutpressingthe trigger,
For heavily soiled areas, it may be
necessary to repeat the cleaning
process. Make crisscrossing strokes to
the original pattern: overlap each pass.
Make no more than 2 passes with the
solution over any one area to prevent
over-wetting and damage to fabric.
If additional cleaning is necessary, wait
until the upholstery is completely dry
before using the tool again.
Empty recovery tank when the motor
sound becomes higher pitched and
there is a lossin suction (see "Automatic
shut-off, page 7).
When finished cleaning, follow "After
cleaning" instructionson page 9 and
'After using tool" instructionson page 11.
12
Storage
Beforestoring:
• Emptysolutiontank and rinse
thoroughlywith cleanwater.
. Replaceempty solutiontank and
turn deepcleaner ON. Squeeze
triggerand pushdeep cleanerfor-
ward and backseveraltimesto
expelany solutionremainingin the
deepcleaner'ssystem,(Do not use
deep cleaneron woodfloors.)
• Emptyrecoverytankand rinse
thoroughlywith cleanwater.
Allow brushes and underside of deep
cleaner to air dry thoroughly before
storing deep cleaner on a carpeted or
wood surface.
Do not store deep cleanerwith a full
solution tank in place.
Lubrication
]'he motor Is equipped with bearings
which contain sufficient lubrication for
the life of the motor. The addition of lubri
cant could cause damage. Do not add
lubricant to motor bearings.
Service
To obtainapprovedHOOVERservice
and genuine HOOVERparts, locatethe
nearest Hoover FactoryService Center
or Authorized Hoover Warranty
Service Dealer (Depot) by:
*checkingthe Yellow Pages under
VacuumCleaners- Household"OR
• checkingthe listof FactoryService
Centersprovidedwith this cleaner
OR-
*calling1-800-944-9200 for an
automatedreferralof authorized
service outletlocations(U,B.only)
OR-
• checking the Service section of The
Hoover Company on-line at
www.hoover.com
Please do not send your cleaner to The
Hoover Company in North Canton for
service, this will only result in delay.
If further assistance Is needed, contact
The Hoover Company Consumer
Response Center, North Canton, Ohio
44720 Phone: [phone].
In Canada, contact Hoover Canada,
Budington. Ontario LTR 4A8,
Phone: [phone].
Always identify your cleaner by the
complete model number when request-
ing information or ordering parts. (]he
model number appears on the bottom of
the cleaner.)