Manual

Attach hose rack
[]Remove tool and taped screw from
rack
Insert projections on rack into slots on
back of cleaner.
I_1 Slide rack down into place. Insert
screw at (D) and tighten with a
Phillips screwdriver
[]
Storing hose & tools
Store hose on rack by first position-
g hose in front section of clip
l_Then continue wrapping hose as
shown snapping end of hose con-
nector into clip.
I_ Position tool in holder at base of
cleaner and snap it into place as
shown at arrow.
m Slide bare floor attachment into
holder as shown.
For Plus* or
Ultra** models
I_The powered hand tool** is shipped
in a plastic bag for protection.
Remove the bag before using the tool
by first opening tool door.
alTo remove tool** (A), pul! it down
and outward,
To reposition the tool, reverse this proce-
dure
To store stair/upholstery nozzle* (B),
open tool door, place nozzle in bracket
and fit it securely into positiion, To
remove, reverse this procedure.
How to reattach tool
cover
_The tool cover is designed with a
break-away feature which allows it
to snap free if it is pushed open too far.
To reattach, atign hinges of cover with
slots on sides of tool storage area
Push cover down to secure in place,