Manual

Grounding
Instructions
A temporary adapter (D) may be used to
DANGER connect this plug to a 2-pole receptacle
m (E) if a properly grounded outlet is not
Improper connection of the equipment- available. The temporary adapter should
This appliance must be grounded If it
should malfunction or breakdown,
grounding provides a path of least resis-
tance for electrical current to reduce the
risk of electric shock. This appliance is
equipped with a cord having an equip-
ment-grounding conductor (C) and
grounding plug (A). The plug must be
plugged into an appropriate outlet (B)
that is properly installed and grounded in
accordance with aN local codes and
ordinances
Ib
grounding conductor can result in the
risk of electric shock. Check with a qual-
ified electrician or service person if you
are in doubt as to whether the outlet is
properly grounded Do not modify the
plug provided with the appliance - if it
wil_ not fit the out_et, have a proper outlet
instatled by a qualified electrician, This
appliance is for use on a nominal 120
volt circuit and has a grounding plug
that looks like the plug illustrated in
sketch (A).
be used only until a properly grounded
outlet (B) can be installed by a qualified
electrician. The green colored rigid ear,
lug, or the like (F) extending from the
adapter must be connected to a perma-
nent ground (G) such as a properly
grounded outlet box cover. Whenever
the adapter is used, it must be held in
place by a metal screw. NOTE: tn
Canada, the use of a temporary adapter
is not permitted by the Canadian
Electrical Code.
A
B
E F G
co .
U Unpack deep cleaner from the car-
ton and identity the parts shown.
Remove and dispose of the packing.
A. Deep cleaner
B. Upper handle OR
Upper handle for stair/upholstery nozzle storage*
OR Upper handle with powered hand tool**
C. Bolts (2)
D. Nuts (3 - one extra included)
E. Carpet/Upholstery Detergent
F. Bare Floor Cleaner
G. PreCleaner (some models)
i. Bare floor attachment
Contained in carton with hose:
I. Hose
J. Stairluphotstery nozzle OR car cleaning tool*
(positioned on rack); Stair/upholstery nozzle not
positioned on rack*
K. Hose rack and screw (taped on rack under nozzle)
L. Clip for hose
*Included with Plus models
**Included with Ultra models