Manual

Pumpis replacedasan assemblywhichincludesthe
quickconnectandtubing.(Fig. 18)
Fig. 18
The quick connect is also available as a separate
service item.
L. Pump duct
The pump duct is held by the pump mounting screw.
(Fig. 19)
Fig. 19
M. Motor cover assembly
DISTRIBUTOR
HOSE
Fig. 20
_ MOTOR
COVER
ASSEMBLY
®
1. Disconnect hose to distributor.
2. Remove five screws (Fig. 21) and lift off.
On pump models, if pump is removed, screw
five will already be out.