Manual

Checkfabric cleaningcode(Fig.25).Look on thefurniture manufacturer's

1 tagfora'W' 'WS'

or code. These codes indicate that it is alright to use your

extractor to clean the upholstery.

Do not use the extractor on upholstery marked 'S', 'X' or 'Dry Clean Only'.

¸¸¸¸¸¸¸3¸¸¸¸¸¸

Vacuum upholstery thoroughly with your vacuum cleaner's attachments.

Test detergent for colorfastness on a hidden area of upholstery.

Wet a white cloth or paper towel with some detergent. Gently rub onto a

hidden area of upholstery. Wait ten minutes. Blot with white cloth or paper

towel and check for color transfer.

Pretreat spots and stains with HOOVER Spot and Stain Spray (Fig. 26).

Spray spot or area with Spot and Stain Spray. Then proceed with the next

cleaning steps.

Fill solution tank with hot tap water and proper amount of HOOVER deter-

gent (see page 5)(Fig. 27).

Use only HOOVER brand detergents in your extractor. Other brands may

damage the extractor.

6 Place handle in upright, storage position. Press on the tab (A) to remove the

hose wand (B) fl'om the f!oor nozzle (C) (Fig. 28).

Slide too! (D) onto end of hose wand. Snap too! over bump (E) on wand

(Fig 29).

Plug extractor into a properly grounded outlet and turn extractor ON.

Squeeze and hold trigger (A) to release cleaning solution. Gently press too!

into fabric and s!owly pu!! the too! over the fabric (Fig. 30).

Let go of trigger and pull tool over same area to pick up dirty solution with-

out putting down more solution. Continue using dry strokes unti! you see

only a little solution coming up through the too!.

Do not make the upholstery too wet! Use no more than two strokes while

releasing solution. Always fol!ow with dry strokes - the more the better.

Listen carefully! When the motor sound changes (rises in pitch), the recovery

tank need to be emptied.

When water has reached the full line in the recovery tank, the extractor will

NOT pick up dirty solution.

o Allow upholstery to dry. Avoid using upholstery unti! it is dry.

Increased air circulation (open doors, turn on fans, etc.) wi!! help upholstery

dry thoroughly to prevent the growth of mold or mildew.