ilOOVER CVm*. The Easy to Use Deep Cleaner Owner’s Manual ENGLISH + pp. 1-13 ESPAfiOL + pig. 14-21 FRANGAlS + p. 22-29 with automatic tool conversion Review this manual before operating deep cleaner Ultra Models Plus Models Deluxe Models These models are included in this manual TM Deep Cleaner cleans carpet fibers hot tap water and cleaning solution.
Fill in and Retain This HOOVER deep cleaner is designed for deep cleaning carpet, rugs, carpeted stairs and upholstery. The model and serial numbers are located on the data label on the back of the handle. For your personal records, please enter the COMPLETE model and serial numbers in the spaces provided and retain this information. Your deep cleaner is model and has serial number It is suggested that you attach your sales receipt to this owner s manual.
,. Grounding Instructions r-l I 0 a 0 1 0I8 1 This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor (C) and grounding plug (A). The plug must be plugged into an appropriate outlet (B) that is properly installed and grounded in accordance with all local codes and ordinances.
The assembled cleaner will look like this drawing (Ultra model shown). Attach upper handle q Remove clean solution tank (upper tank) from deep cleaner. With cord hook (A) to back of deep cleaner, push upper handle down onto EII lower handle. Push bolts into holes on front of handle. If bolts will not go through hole easily handle is not pushed completely down. B / I q Place nuts in recessed areas on ’ back of handle.
Attach hose rack q , Remove tool and taped screw from rack. Insert projections on rack into slots on back of cleaner. q Slide rack down into place. Insert screw at (D) and tighten with a Phillips screwdriver. Storing hose & tools q Store hose on rack by first positioning hose in front section of clip. Slide bare floor attachment into holder as shown. q q q For Plus* or Ultra** models q How to reattach tool cover Then continue wrapping hose as shown snapping end of hose connectar into clip.
The assembled deep cleaner will look like the drawing. q. 1. Hand grip 2. Solution trigger: press to release clean solution. 3. Cord clip: place cord in clip to keep it out of the way when using cleaner 4. Hose 5. Hose holders: wrap hose around holders for storage. 6. Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for quick and easy cord release. 7. Stair/upholstery nozzle* OR Powered hand tool** 8. Carrying handle 9. Clean solution tank handle 10.
q The deep cleaner may also be lifted by placing a hand under the upper clean solution tank handle as shown. Agitator Speed selector El When the recovery tank (lower tank) is ’ full the automatic shutoff mechanism will shut off the deep cleaner suction (suction will be noticeably reduced). At that time the red float disk will rise to the top of the recovery tank lid (E). The deep cleaner will no longer pick up dirty solution and the motor sound will become noticeably higher in pitch.
Using cap, measure detergent following the chart below. For carpet, carpeted stairs and upholstery: Fill cap to fill line (5 ounces) with HOOVER CarpetiUpholstery Detergent For bare floors: q. Fill cap to fill line (5 ounces) with HOOVER Bare Floor Cleaner Do not use Bare Floor Cleaner on carpet or upholstery. Do not use any type of wax with your ‘SteamVac’ deep cleaner. Rotate tank cap counterclockwise and lift up to remove cap. Turn cap (A) upside down to serve as a measuring cup.
For full suction, it is important that the recovery tank lid is properly secured before cleaning. Raise tank handle to carrying position to place it into base of cleaner. Move handle completely forward to lock tank into place (see Fig. 35). q Raise handle to carrying position (straight up) to unlock tank from base of deep cleaner. Lift tank from deep cleaner and carry it to a sink or drain. Before you begin cleaning a.
To clean the outside of the machine, wipe off dirt with a cloth dampened in warm water and mild detergent. Do not use solvent or petroleum based products to clean the machine. Read “Before you begin cleaning” instructions on page 9. Fill clean solution tank (upper tank) with HOOVER Carpet/Upholstery Detergent according to instructions on pages 7 and 8. Move speed selector to LO for gentle cleaning or Hi for normal cleaning. Dry hands and plug cord into a properly grounded outlet.
c Dry hands and plug deep cleaner into a properly grounded outlet. Step on handle release pedal and lower handle to operating position; turn deep cleaner ON. To release solution, press trigger. Slowly move deep cleaner forward and backward over area to be cleaned. To pfck up dirty solution, release trigger and slowly move deep cleaner over area where solution has just been dispersed. Use both forward and reverse strokes.
When finished cleaning, follow “After cleaning” instructions on page 9 and “After using tool” instructions on page 11. Read “Before you begin cleaning” Instructions on page 9. Lift tool, and position it against riser. Pull tool slowly over carpet without pressing trigger (dry stroke). It is best to alternate wet and dry strokes as described above. End with more dry strokes to aid in faster drying of carpet. Overlap strokes by l/2 inch to help prevent streaking.
If you have a problem If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check list below.
il I i i I : ( nbras
