7010 PRESTIGE Cyclonic Bagless Vacuum Cleaner High Efficiency Motor Bagless Cyclonic Technology Compact, Lightweight & Stylish Design Prestige
1 3 4 5 7010 Prestige 2 Congratulations on your purchase of your new HOOVER vacuum cleaner. There are many useful features built into your cleaner and we recommend that you carefully read this instruction book so that you may take best advantage of them. 6 Features: 1. 2. 3. 4. 5. 6. 7. 8. 9. 7 8 Handle Accessory Holder 2-in-1 Tool Air Outlet Crevice Tool Hose Length Adjust Release Button Telescopic Tube Wessel-Werk Floor Head 10 Accessories: 11 1.
Before you begin Before you begin The cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring and fabrics. This cleaner is not fit to be used as an industrial cleaner, and is not designed for the collection of vitreous building material including particle board, construction products and similar products such as wood/fibres, cement, fillers, fibre glass etc or excessive or frequent sand.
Warning To reduce the risk of fire, electric shock, or injury: 1. Do not leave the appliance connected to the mains power supply when not in use. Disconnect from any power supply before performing any maintenance duties. 2. To reduce the risk of electric shock, do not use outdoors or on wet surfaces. 3. This appliance must not be used as a toy. Do not allow children to use the appliance unattended. 4. Use only as described in this instruction manual.
Instructions for use Before using, unwind a sufficient length of cable and insert the plug into the power socket. A yellow mark on the power cable shows the ideal cable length. Do not extend the cable beyond the blue mark. 2. To rewind the power cable, press the rewind button with one hand and guide the cable with the other hand to ensure that it does not whip, causing damage to the cable. 3. S lide the Electronic Power Switch to control the suction.
Instructions for Use (continued) 1. Before assembling the vacuum cleaner, confirm all parts and components for the cleaner are included by referring to Parts and Components List. 2. Ensure the cleaner is not connected to the power supply when assembling. Insert the hose into the dust canister inlet in a horizontal direction. Ensure the two projecting parts align and gently insert. Turn the hose right when it is fully inserted, it should make a click sound when correctly inserted.
Maintenance Vacuum Cleaner Storage When not in use, ensure the cleaner is not connected to the power supply, and pull the power cable gently out of the power socket. Step on the automatic cord rewind button to reel in the power cable fully. Store the cleaner in a cool dry location. Dust Canister Cleaning Remove the rubbish in the dust canister frequently to avoid unnecessary blockages that may lead to failure of the motor in prolonged occurrences.
Maintenance Troubleshooting Problems and solution If you come across a problem, please use the checklist of troubleshooting tips before ringing Hoover Customer Care. The rear motor filter is installed behind the air outlet grid, this filter is washable. When dust or dirt is visible on the surface of the filter, the filter should be replaced or washed with warm water to maintain efficient suction It is required to clean and replace the filters for the motor, after they have been used for 6 - 12 months.
Conditions of warranty Your Hoover cleaner, in the case of domestic use, has a three year parts and labour warranty against product defects and failures when the product is used in accordance with the terms and conditions of this warranty statement. This warranty commences from the original date of purchase and is not transferable; please retain your original proof of purchase for any warranty claims. This warranty is valid only in the country where the cleaner is purchased.
