Instruction for “HooToo TripMate” on Mac HooToo TripMate The setup of “HooToo TripMate” for Mac computer is very straightforward and easy to following, please check below the instruction for accessing your TripMate HT-TM01. 1. Connecting with your TripMate HT-TM01 on Mac Step 1: Attach the USB storage to your TripMate and then power up your TripMate by holding the power button for 3-5s till the battery indicators start to light up (preferable with network cable installed and WiFi LED solid BLUE).
. Accessing your USB Storage on Mac Step 1: Run the software client “HooToo TripMate” to open the search interface (shown below), this program tool will list out available TripMate in the local network. (“HooToo TripMate for Mac”) [IMPORTANT] Please download the software client “HooToo TripMate” from our website at: http://www.hootoo.
Step 2: Choose the TripMate on the device list which want to access, click on the “My Storage” button to prompt out a dialog, see below: Default user name: admin Default password: no password, leave it blank. Step 3: You can now access all files and directories that are attached to your TripMate, you may perform actions on the files such as: create, edit, delete, copy, move, rename.
3. Accessing the Admin Setup Page for TripMate Step 1: Run the software client “HooToo TripMate” to open the search interface (shown below), this program tool will list out available TripMate in the local network. (“HooToo TripMate for Mac”) The HooToo TripMate will find all available “TripMate” in the local network: This will lead you to the admin setup page: 10.10.10.254 Note: If the search interface doesn’t find your TripMate, please click on the “Refresh” button to search again.
Step 2: Select the TripMate on the search list and click “Log in” to open the browser and access the TripMate admin setup page via “10.10.10.254”. Default user name: admin Default password: no password, leave it blank. Note: You may also put http://10.10.10.254 into the URL box and enter the admin setup page of TripMate, after Step 2.
There are 4 main webpage Management Interfaces: A. Explorer Function: This section is based on the fact that the NAS (USB storage) is properly attached to your TripMate device. It allows the user to upload files to your NAS (USB storage), create new folders, copy, move, delete and rename the folders or files.
B. Information Function: Device: You can see all the information of your TripMate HT-TM01, including the host name, serial number, model etc. Storage: Provides information of the USB external storage, including the brand, total capacity, available capacity.
Network: Provides detailed information regarding the current network setting, including the connections access to the Internet, WIFI SSID and IP address. You may click on the “Detail” to check more information, and click “return” to go back the following page.
C. Setting Function User Setting: This window will allow you to modify the admin password (5 characters minimum and 32 characters maximum.) Password is case sensitive, once you change the password; there is no way to go back to the “no password” status, unless you perform a reset to the device.
Disk Setting: This window provides information regarding the internal hard drive as seen on the screenshot below. Disk: It provides detailed information on your NAS/External USB Disk, including firmware version, serial number, disk total capacity, temperature, and more. Volume: It provides information regarding the File System used to format the internal hard disk drive, total and available capacity.
Network Setting: Host Name: The Hostname is a name that is assigned to a device connected to a computer network. It can be modified to whatever name that will fit your needs. (It must begin with a letter and followed by a combination of letters and numbers and required minimum 2 characters and maximum 8 characters in length.) WiFi & LAN: The WiFi & LAN can be modified based on your needs. However, we do not recommend you to change the default settings unless you can not get your TripMate to work properly.
DHCP Server: The DHCP or Dynamic Host Configuration Protocol is a network protocol that enables a server to automatically assign an IP address to a computer connected into a network. By default, the DHCP Server option is enabled. And this option can be disabled if needed and the IP address can be manually assigned. This is similar to parameter setup in a regular router; you may consult us for setup if needed. Internet: There are two available Internet Access options.
Wired Access: Directly connecting your TripMate to the available port on the back the router.
System Setting: Time Setting: Choose to synchronize time with the Internet or the time on your PC. Backup Setting: To save your TripMate system configuration. Please note that this process will NOT create a backup of the NAS/USB storage contents.
Firmware Update: Update the latest version of the firmware. Please always contact us at support@hootoo.com before you run a firmware upgrade on the device, failure to do so may render the 12-month warranty voided.
D. Help Function: A detailed operating instruction regarding the function of the HT-TM01 Any questions, please feel free to contact us at support@hootoo.com .
