Instruction Manual

8
Access Point Mode Setup:
Step 1. Connect the Repeater to an available AC electrical outlet.
Step 2. Two Options:
a. Wired Setup: Connect an RJ45 Ethernet cable from the Repeater to your computer.
(Then go to step 3)
b. Wireless Setup: Connect to the wireless network ‘WiFi-Repeater’ (then go to step 4).
Step 3. The default IP address on the Repeater is 192.168.10.1; configure your
computer to a matching network address (192.168.10.x, where ‘x’ is between 2~255)
with subnet set to 255.255.255.0 and default gateway to 192.168.10.1.
Step 4. Open a web browser window and enter 192.168.10.1 into the address bar. This
will bring up the login prompt for the Repeater. The default user name and password
are ‘admin’ (without quotes).
Step 5. From the main menu of the Repeater configuration utility, click the ‘Setup
Wizard’ link followed by the ‘Standard Wireless AP Mode’ option. Click ‘Next’ to
continue.
Step 6. The next screen will list some basic information. Click the ‘AP – One Key Setting’
button to proceed.