◆preface Thank you for purchasing the company vehicle traveling data recorder. Before the formal use, please read this manual carefully, to ensure that the correct use of the product.Keep this manual for future use ◆Infringement of copyright warning Please note that this product is only for personal use, the method of use shall not violate the goods infringe on domestic or international copyright laws.
This product is a set of hd video, pictures, and built-out TF card memory in one multi-functional new high-tech products, high compression ratio and high performance is used for video codec technology, has the HDMI high-definition multimedia interface, high quality to transmit uncompressed high-definition video and multi-channel audio data.
photography, take, etc. - please do not pile up on the equipment items, otherwise may lead to a broken screen. - do not use sharp objects in contact with the screen in order to avoid damage to the screen. - do not let children play with the equipment. The basic function in pieces recorder - low illumination high-definition video in 1080 p @ 30 FPS - built-in low illumination high pervious to light a 170 - degree lens - 2.
- drive synchronous start - support cycle video - the largest support 32 gb TF card - support charging, while video - image real-time monitor the output - new WDR wide dynamic video Structure ◆Front view 4
1.Camera 2. Screen 3. The power button 4. UP key 5. Menu 6.OK button 7. The mode key 8. Down key ◆side view 9.TF slot 10.
11.MIC 12.Speaker 13.Reset 15.AV-OUT 16.Stent hole 14.GPS slot 17.
Power According to the boot, long press to turn it off Menu Short press enter the menu（ video mode, One key to lock file） Mode Short press to switch working mode UP UP（ZOOM） DOWN DOWN，Video on standby mode, click open or close the recording OK OK Reset Reset the system ◆light name instruction Red light Charge indicator, charging is complete, go out Red light Work light, video, flashing blue light regularly 7
Operation and use ◆Insert the memory card 1. According to the instructions carefully insert the card in the card slot.Errors or rough insert memory card may make damage of memory card or the card slot. 2. Insert the memory card will be saved as image recording. 3. If the device does not recognize the card, please take out the insert to try again.If you still can't identify, which they may be for the damaged card or device does not support this type of memory card.Please try to replace another memory card.
1. The manual switch machine: long press the power button once, the screen lights up, then long press the power button to turn it off can be realized. 2. Driving automatic switch machine: access to the car first 5 v power supply, the machine will start automatically when the car start and carry on video.When the engine according to the menu to select delay automatically save the current video and turn it off.
PHOTO MODE Taking pictures PLAYBACK MODE Play back the video or photos Note: after system boot into video mode by default.Standby mode, short press the menu button switch cycle mode Video mode： Start/stop video: insert TF card, connect the car charger, car starts, the machine will automatically start the video.
Picture mode Aim the camera recording, keep the recorder doesn't shake, press the "confirm" button, "MAO wipe" sound, the machine makes a photo shoot.The user can choose different shooting mode according to their own requirements.
Playback mode： File selection and broadcast: 1, turn key and the key files were selected, and make sure the keys file playback 12
2, play in the process, click the ok button to pause playback, click again, play again During playback, click on the turn and turn key can be set up under the fast forward and fast ◆Menu Settings and system setting In short video standby mode according to the menu, the machine into the system Settings menu page, then doubled and choose the required set projects;Press the confirmation key set, short press the menu button to return to menu items.
Loop video Select 2/3/5 minutes to circulation photography, photography can also be closed cycle WDR When open this option, the video quality to be improved Motion detection Open motion detection and camera can induction target change, target motion, the machine will automatically open the video Power supply automatic video Delay shutdown Open this function, the power supply, automatic machine video When the delay time of power machine after work time Boot time delay In selected 10 s, for example
The date tag After opening, recorded video files inside there will be a corresponding date/time watermark G-sensor Can select high/medium/low three gears, also can choose to shut down Picture mode option Function Functional description Resolution 1M/2M/3M resolution of the photo files Settings way Settings, can be set up regularly shoot Can be set up three shoot Image quality Image quality is high quality/standard/common three options sharpness Enhance/standard/soft color Normal/black and
Quick preview When you shoot photos, can choose preview of the time date tag After opening, file it will be a date/time watermark ◆System Settings function Functional description Date/time Set the date/time of the machine license record Set of license plate can be recorded in the file shown above Automatic Set the machine automatic shutdown time in shutdown standby mode key sound Key sound of opening and closing language Chinesesimplified/traditionalChinese/English/Germ an/Japanese/French/
anish TV Light NTSC/PAL source 50HZ/60HZ frequency Screen saver working status, the screen closed time to choose EV The higher the value, the brighter the video, the conventional 0 white balance Automatic/sun/cloudy/tungsten filament lamp, fluorescent formatting default Settings version Format the memory card System restore the default value m.
computers, can appear at this time recorder three options, select "memory", the computer will appear a removable disk, the device has reached the U disk mode.Under the mode of mobile hard disk, can be recorded by copying files or shear to play in the computer, also can remove the TF card, use the data in a card reader to read the card;Select the "camera", recorder can do PC CAM use;Select "video", the machine starts, can connect the computer, while charging operation.
signal can be output terminal display such as televisions. Product specification DSP NOVATEK video resolution 1080P/720P/WVGA/VGA Photo resolution 5M/3M/2MHD screen Lens 2.
Chinese/English/Japanese/German/French/Port uguese/Korean/Russian/Italian ＨＤＭＩ Support Battery capacity 400mAh Microphone/speaker Support DC in 5V 1500mA Note: the specification may be due to the upgrade and update changes such as reason, in kind prevail Simple question out In the event of failure, please try to use the following method.If you cannot be ruled out, please contact after sales and maintenance.
Can't normal video recording - change the TF card - change the resolution - insert the larger capacity memory card. - make sure the card has been installed correctly (during the installation process, you should hear a clicking sound). - delete unnecessary files from memory card to release space. Video is not clear - make sure camera lens is clean. - wipe off the dust and dirt on the lens, and then shoot. Equipment works well, but button doesn't work - press the reset button to initialize the machine.
In general please careful with reset initialization, the operation is likely to lead to loss of data. Special function introduction: (GPS module is optional) Equipped with GPS module, can complete record the trajectory of driving.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
