User's Manual




5
HardwareSpecifications
Project name Seabird
Model name RP-WD03
CPU
Model MT7620N
Frequency MIPS24KEc 580MHZ
Flash
Model EN25Q64
Capacity 8MByte SPI flash
SDRAM Capacity DDR1 32MByte (256Mbit)
WiFi
standard 802.11b/g/n
Frequency 2.4GHz
Antenna Array 2T2R
Signal strength 17dBm
Speed Max 300Mbps
WAN port
Protocol Ethernet
Speed 100Mbit/s
Interface
Battery
LED (White*4pcs)
LED light to show the percentage of
remaining power.
As below :
LED1: 0~25%
LED2:26~50%
LED3:51~75%
LED4:76~100%
WiFi LED (Blue/Green)
WiFi LED shows the system initiating
state:
Blue LED Start flashing: Kernel loading
in process
Blue LED Stop flashing: System
initiation completes
GreenLED：Internet is connected
successful
SD Card R/W LED Blue
SD Slot Support to SDXC, up to 2TB
Power button 1. Power on/off button (2 seconds
long pressing)
2. percentage of remaining power
button(short pressing)
Reset button Factory default reset button
USB device interface Micro USB 2.0 for charging internal