ITEM NO.： GYM 8 Assembly Instructions 42 Inch Gas Fire Pit DANGER: FIRE OR EXPLOSION HAZARD If you smell gas: • Shut off gas to the appliance. • Extinguish any open flame. • If odor continues, leave the area immediately • After leaving the area, call your gas supplier or fire department. Failure to follow these instructions could result in fire or explosion, which could cause property damage, personal injury, or death.
Table of Contents Assembly..………………………………………....…7-10 Operating Instructions .........................................11-13 Maintenance...........................................................14 Care and Cleaning ................................................14 Troubleshooting ....................................................15 Service Parts................................................. 16 Table of Contents ..........................................................2 Safety Information.............
Safety Information (continued) WARNING: You must provide propane gas and propane cylinder. Use a standard 20 lb. propane cylinder only. Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard for Storage and Handling of Liquefied Petroleum Gas, ANS/NFPA 58. Your local library or fire department should have this book. The pressure regulator and hose assembly supplied with the appliance must be used.
Safety Information (continued) WARNING: Solid fuels shall not be burned in this appliance. The installation must conform with local codes or, in the absence of local codes, ANSIZ223. 1/NFPA54, NFPA58 Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2.
Warranty 1 YEAR LIMITED WARRANTY • We warrant the metal frame and burner to be free of manufacturing defects to the original purchaser for one years. • Proof of purchase (dated register receipt) is required for warranty claims. WHAT IS NOT COVERED It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial use, acts of nature, fire, freezing and abusive use.
Package Contents D E K J F C I G A B H M L A B C D E F G Door Frame Back Leg B Back Leg C Metal Lid Lava Rock Table Top with Burner Side Panel 1 1 1 1 1 1 1 H I J K L M 5 Side Panel with Window Back Panel Longer Ceramic Tile Shorter Ceramic Tile Gas Tank Support Cover 1 1 2 2 1 1
Assembly 1 Assembling the Legs □ Attach Door Frame (Part A),Back Right Leg (Part B B) and Back Left Leg (Part C) to the Tabletop with Burner(Part F) by using (4) M6x10mm Bolts(Part AA). C NOTE: Do not completely tighten the bolts. A AA 2 Assembling Side Panels with Widow □ Attach Side Panel with Window (Part H) to the Legs (Parts A & B) by using (4) M6X25mm bolts (Part BB). □ Connect the Control Panel to the Side Panel with Window (Part H) by using (4) M5X10mm Bolts(Part CC) and (4) M5 Nuts(Part DD).
Assembly 3 Assembling Side Panels and Back Panel □ Attach Side Panel (Part G) to the Legs (Parts A & C) by using (4) M6X25mm bolts (Part BB). BB □ Attach Back Panel (Part I) to the Legs (Parts B & C) by using (4) M6X25mm Bolts (Part BB). B I BB NOTE: Do not completely tighten the bolts. C G A 4 Assembling the Gas Tank Support □ Attach the Gas Tank Support (Part L) to the Side Panel (Parts G & H) by using (4) M6X25mm Bolts (Part BB).
Assembly 5 Place the Ceramic Tile □ Place the Ceramic Tile(Parts J & K) into the Tabletop. K J 6 Assembling the Lava Rock □ Ensure the Lava Rock (Part E) are not placed on the ignition portion of the burner. □ NOTE: Ensure no glass stone is placed on the ignition portion of D the burner.Then place the Cover (E) on. NOTE:The cover must be removed when the burner is in E operation.Wait until the unit cools before installing the cover.
Assembly 7 Assembling the Cylinder □ Put the cylinder into the Gas Tank Support (Part L), and secure the cylinder by tightening the screw in the gas tank support. Connect the hose and regulator to the cylinder. NOTE: The propane cylinder is sold separately. Use a standard 20 lb. propane cylinder only. Put the hose away from the bowl base during connect the propane cylinder. 8 □ Installing the AAA Battery Open the igniter and place the AAA Battery（EE） into the igniter. Then tighten clockwise.
Operating WARNING: Never use this appliance for other than the intended use. DO NOT use this appliance to prepare food. Initial Lighting: When lit for the first time, the appliance emits a slight odor. This is a normal temporary condition caused by the “burn-in ” of internal paints and lubricants used i n the manufacturing process and does not occur again. Simply run the main burner on high for approximately 30 minutes.
Operating (continued) LEAK TESTING OPERATION WARNING: A leak test must be performed annually or if a part of the gas system is replaced. WARNING: Never use an open flame to check for gas leaks. Be certain no sparks or open flames are in the area while you check for leaks. Sparks or open flames will result in a fire or explosion, damage to property, serious bodily injury, or death. LEAK TESTING: 1, Make 2-3 oz. of leak detection solution by mixing one part liquid dishwashing soap with three parts water.
Operating (continued) LIGHTING CAUTION: Keep the outdoor gas appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids. CAUTION: Do NOT obstruct the flow of combustion and ventilation air. CAUTION: Check and clean burner/vent tubes for insects and insect nests. A clogged tube can lead to a fire.” 1. Make sure all labels, packaging and protective films have been removed from the outdoor fire pit. 2. Control knob must be in the “OFF” position (Figure 1). 3.
Maintenance Storage between uses: □ Turn the control knob to “OFF” position. □ Disconnect LP source. □ Store heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust and debris). □ If desired, cover heater to protect exterior surfaces and to help prevent build up in air passages. NOTE: Wait until heater is cool before covering. Storage during periods of extended inactivity or when transporting: □ Turn the control knob to “OFF” position.
