ASSEMBLY INSTRUCTION Item#: 638-50003 Bennett X-Base Writing Desk ** Please make sure you have all parts indicated below prior to assembly.
Assembly steps: 1. Pull out two side drawers and place desk top upside down on a soft surface to prevent from scratching top. 2. Insert one bolt(D) into hole of left and right X-bases(K), attach the end of stretcher(J) to bolts(D) on X-bases(K) using curved washer(C), nut(A), tighten securely with spanner (B)(see diagram 1). 3. Attach assembled X-base(K) to the top panel using bolts (I), lock washers (G), flat washers (H), and secure all bolts with allen wrench (E) in a clockwise direction (see Diagram 2).
