Assembly Instructions

2/2
Note: Height of this table can be adjusted by removing the extension block,
below are assembly steps:
1. Unscrew bolts (B), lock washers (C) and flat washers (D) with allen wrench (A) in
anti-clockwise direction, then take off mounting plate (G). (See Diagram 2)
2. Remove extension block (H) by unscrewing bolts (E), lock washers (C) and flat
washers (D) with allen wrench (A).
3. Re-attach mounting plate (G) to base (F), insert bolts (B), lock washers (C) and flat
washers (D), secure with allen wrench (A) in clockwise direction. (See Diagram 3)
4. Attach whole base to top by using bolts (B), lock washers (C) and flat washers (D),
tighten bolts with allen wrench.
5. Turn table upright.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water
solution. Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram 3
Diagram 4