Assembly Instructions

1/2

ASSEMBLY INSTRUCTION

Item#: 5805-90019-99 Bench

** Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more people

Diagram 3 Diagram 4

Diagram 1

Diagram 2

PAGE 1
ASSEMBLY INSTRUCTION Item#: 5805-90019-99 Bench ** Please make sure you have all parts indicated below prior to assembly.
PAGE 2
Assembly Steps: 1. Put seat frame (K) upside down on a soft surface to prevent it from being scratched. Attach center leg frame(H) to seat frame (K) by using bolts (A), lock washers (B) and flat washers (C), tighten with allen wrench (D) in clockwise direction. Do not over tighten (See Diagram 1). 2. Screw full threaded rod (E) into metal stretcher (J) in clockwise direction.Then align one end of full threaded rod (E) to the pre-drilled hole on center leg frame and through it .