Assembly Instructions

ASSEMBLY INSTRUCTION

Item#: 5750-90019-MWD Bed Bench

** Please make sure you have all parts indicated below prior to assembly.

Assembly Steps:

1. Put seat frame (E) upside down on a soft surface to prevent it from being scratched.

(See Diagram 1).

2. Attach bench leg (F) to corner block of seat frame (E) by using bolts (A), lock washers (B) and

flat washers (C), tighten with allen wrench (D) in clockwise direction (See Diagram 1).

3. Assemble other legs in the same way.

4. Turn bench upright.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water

solution. Polish the finish with soft cloth and an industry recognized furniture polish.

Diagram 1

PAGE 1
ASSEMBLY INSTRUCTION Item#: 5750-90019-MWD Bed Bench ** Please make sure you have all parts indicated below prior to assembly. Diagram 1 Assembly Steps: 1. Put seat frame (E) upside down on a soft surface to prevent it from being scratched. (See Diagram 1). 2. Attach bench leg (F) to corner block of seat frame (E) by using bolts (A), lock washers (B) and flat washers (C), tighten with allen wrench (D) in clockwise direction (See Diagram 1). 3. Assemble other legs in the same way. 4. Turn bench upright.