Assembly Instructions

2/2

2. Touch dimmer is at the inside of right post.

3. If you want to bunch two or more curios together, place them all side by side in a desired location.

4. Leave male connector of the can light (C) and female connector of power Switch (B) for the first

curio (#1) as it is. Keep male connector of the can light (C) and female connector of power switch

(B) off for the rest curios ( #2, #3, and so on). (See diagram 2)

Diagram 3

5. Connect female connector of the can light (D) (#1 curio) with male connector(E) of power wire, then

have female connector(F) of power wire connected to male connector of can light (C), repeat this

step for 3

curio and the rest ones when more than two are bunching together till each one is

connected. (See diagram 3)

6. Plug in male connector of power switch (A) ( #1curio).

7. Touch the dimmer of the #1 curio, all can lights connecting together will be on at the same time.

Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp

cloth. Polish the finish with soft cloth and an industry recognized furniture polish.