Installation & Assembly

1/3

ASSEMBLY INSTRUCTION

Item# 5751-75206-95 Friendship Table

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more people.

Diagram 1 Diagram 2 Diagram 3

Note:

1. Leaves cannot be switchable. Follow numbers on leaves and top when assemble

2. Height of this table can be adjusted with or without extension block. (30” and 36” heights)

Assembly steps with extension blocks:

1. Attach extension blocks (H) to posts (I),then attach mounting plate (J) to posts with extension

blocks (H)by using bolts (E), lock washers (C) and flat washers (D), tighten all with allen

wrench (A). (See Diagram 1)

PAGE 1
ASSEMBLY INSTRUCTION Item# 5751-75206-95 Friendship Table ** Please make sure you have all parts indicated below prior to assembly. This table is heavy and can best be assembled with the help of two or more people. Diagram 1 Diagram 2 Diagram 3 Note: 1. Leaves cannot be switchable. Follow numbers on leaves and top when assemble 2. Height of this table can be adjusted with or without extension block. (30” and 36” heights) Assembly steps with extension blocks: 1.
PAGE 2
. Attach stretcher (K) to posts (I) with bolts (F), lock washers (C) and flat washers (D), sure all by allen wrench (A)(See Diagram 2) 3. Place table top (L) upside down on a soft surface to prevent it from being scratched. Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert bolts (G), lock washers (C) and flat washers (D), tighten bolts by turning with allen wrench (A) in clockwise direction. (See Diagram 3) 4. Turn table upright.
PAGE 3
5. Take opposite actions to remove table leaves. Diagram 7 Diagram 8 Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution. Polish the finish with soft cloth and an industry recognized furniture polish.