Installation & Assembly

1/2

ASSEMBLY INSTRUCTION

Item# 5820-75202-84 Foyer Accent / Dining Table

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more people.

Note:

1. Height of this table can be adjusted with or without extension blocks. ( 42” pub height ,and 36”

counter height, 30”dining height).

42” pub height 36” counter height 30”dining height

Assembly steps -- 42" pub height:

Diagram 1

1. Place table top (A) upside down on a soft surface to prevent it from being scratched.

Put whole base(B) onto top to make sure pre-drilled holes are in alignment, and turn

the base in clockwise direction tightly(See Diagram 1).

2. Turn table upright.

PAGE 1
ASSEMBLY INSTRUCTION Item# 5820-75202-84 Foyer Accent / Dining Table ** Please make sure you have all parts indicated below prior to assembly. This table is heavy and can best be assembled with the help of two or more people. Note: 1. Height of this table can be adjusted with or without extension blocks. ( 42” pub height ,and 36” counter height, 30”dining height). 42” pub height 36” counter height 30”dining height Assembly steps -- 42" pub height: Diagram 1 1.
PAGE 2
Assembly steps --36" dining height: Diagram 2 Diagram 3 1. Unscrew and remove one of the extension blocks (Small dia. of block (S) or Large dia. of block (L) ) from the base (B) in a counter-clockwise direction (See Diagram 2). 2. Place table top (A) upside down on a soft surface to prevent it from being scratched. Put whole base(B) onto top to make sure pre-drilled holes are in alignment, and turn the base in clockwise direction tightly (See Diagram 3). 3. Turn table upright.