Specification Sheet

1/2

ASSEMBLY INSTRUCTION

Item#: 5960-75200B-BLK Bandera Trestle Dining Table Base

5960-75200T-BRN Bandera 86in Table Top w/2-18in Leaves

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more people.

Assembly steps:

1. Insert locator dowels (F) into the left and right pre-drilled holes on stretcher (H). Well place

stretcher between pedestals (G), use bolts (E), lock washers (C) and flat washers (D), secure

all by turning with allen wrench in clockwise direction. (See Diagram 1)

2. Place table top (I) upside down on a soft surface to prevent it from being scratched.

3. Attach pedestals to top by using bolts (B), lock washers (C) and flat washers (D), tighten all

with allen wrench (A). (See Diagram 2)

4. Turn table upright.

Diagram 1

Diagram 2

PAGE 1
ASSEMBLY INSTRUCTION Item#: 5960-75200B-BLK Bandera Trestle Dining Table Base 5960-75200T-BRN Bandera 86in Table Top w/2-18in Leaves ** Please make sure you have all parts indicated below prior to assembly. This table is heavy and can best be assembled with the help of two or more people. Diagram 1 Diagram 2 Assembly steps: 1. Insert locator dowels (F) into the left and right pre-drilled holes on stretcher (H).
PAGE 2
Instruction for table leaves: 1. There are latches at the bottom of table top, turn off the latches as shown in Diagram 3. 2. Pull out table top as the arrow direction shown in Diagram 4. 3. Place table leaves between and push table tops together. 4. Turn on latches. (see Diagram 3) 5. Take opposite actions to remove table leaves. Diagram 3 Diagram 4 Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.