Assembly Instruction

1/2

ASSEMBLY INSTRUCTION

Item#: 5291-75510 Upholstered Side Chair-2 per carton

** Please make sure you have all parts indicated below prior to assembly.

Diagram 1 Diagram 2

Assembly Steps:

1. Place chair back (F) on a clean surface.

2. Tighten seat frame (G) to chair back (F) by using bolt (C), lock washer (B) and flat washer

(A) at the center location. (See diagram 2). Then, tighten the corners of seat frame (G) to

chair back (F) by using 4 bolts (E), 4 lock washers (B) and 4 flat washers (A). (See

diagram 1)

3. Assemble two front legs with front corner blocks of seat frame (G), using 4 bolts (C), 4 lock

washers (B) and 4 flat washers (A). Tighten all bolts by hand. (See diagram 2)

4. After all bolts are attached and hand tightened, turn the chair upright.

5. Level the chair following the “chair leveling instruction” as below.

PAGE 1
ASSEMBLY INSTRUCTION Item#: 5291-75510 Upholstered Side Chair-2 per carton ** Please make sure you have all parts indicated below prior to assembly. Diagram 1 Diagram 2 Assembly Steps: 1. Place chair back (F) on a clean surface. 2. Tighten seat frame (G) to chair back (F) by using bolt (C), lock washer (B) and flat washer (A) at the center location. (See diagram 2). Then, tighten the corners of seat frame (G) to chair back (F) by using 4 bolts (E), 4 lock washers (B) and 4 flat washers (A).
PAGE 2
6. Make sure the chair is level and then tighten all bolts completely by using the allen wrench (D). PLEASE READ THESE INSTRUCTIONS PRIOR TO ASSEMBLING THE CHAIRS CHAIR LEVELING INSTRUCTION SUPPLEMENT Chair leveling procedures: To make the assembly process easy and efficient, please read the entire instruction sheet prior to assembling of the chair. Make sure all hardware listed is included.