ASSEMBLY INSTRUCTION Item#: 5070-75411 Wood Back Side Chair ** Please make sure you have all parts indicated below prior to assembly.
Assembly Steps: There are two K/D chairs in one box. Please follow numbers on one chair and letters on the other chair during assembly. 1. Place back frame (G) on a clean surface. 2. Tighten the rear corner blocks of seat frame (I) to back legs of frame (G) using bolts (C), lock washers (B), flat washers(A). Also tighten the back legs of frame(G) to the seat frame(I) by using bolt(E), lock washer(B) and flat washer(A). (See diagram 1&3) 3. Insert stretcher (H) to holes at the back legs of frame (G).
Note: Most floors have slight irregularities that can affect chair leveling. If your chair is uneven when placed in its desired location, perform the following steps: 1. Loosen front legs to finger tight. 2. Extend both front legs upward to their fullest length. 3. Gently push downward on the front edge of the seat until all four legs rest on the floor. 4. Re-tighten all bolts and nuts. Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
