Installation Sheet

2/2
Assembly Steps:
1. Place table top upside down on a soft surface to prevent from scratching top.
2. Attach two ends of stretcher (J) to “X” base (K) using bolt (E), lock washer (C), flat washer (F), secure
by turning with allen wrench (A) in a clockwise direction. Insert cap (G) to cover the hole. (See diagram
1).
3. Align dowels on “X” base (K) to holes pre-drilled on rails under table top (M), attach “X” base to table top
using bolt (B), lock washer (C), flat washer (D), secure by turning with allen wrench (A) in a clockwise
direction. (See diagram 2).
4. Turn the table upright.
Caution: Do not over tighten.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution. Polish the
finish with soft cloth and an industry recognized furniture polish.