Installation Sheet

3/3
Note: You can change the height of slat by adjusting the height of cleat on side rail as shown in diagram 4
1. remove the bolt (Q), lock washer (R) and flat washer (S) from the cleat by turning the bolt (Q) with allen
wrench (P) in anti-clockwise direction, adjust the cleat to a desired position, and then secure the
lock washer, flat washer, bolt in a clockwise direction by turning with allen wrench(P).
Diagram 4
You can adjust the height of center supports (L) as shown in Diagram 5 to meet your need by following
steps.
1. Unscrew bolts on center supports (E) with allen wrench (L).
2. Adjust the height of center supports, align the holes on 2pcs of woods and tighten them together with
2 bolts(M), 2 lock washers (N) and two flat washers（O）by turning with allen wrench(L) in a clockwise
direction.
Diagram 5
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp cloth.
Polish the finish with soft cloth and an industry recognized furniture polish.