Installation Sheet

2/3

Assembly steps:

1. Insert 2 bolts (F) into holes of each post on Headboard (A) and Footboard (B), attach the end of side

rails (C) to the bolts (F) on posts using 2 curved washers (G) and 2 nuts (H), tighten nuts (H) securely

with spanner wrench (I). (See diagram 1)

Diagram 2

2. Take out center supports (E) from rail box, place center supports (E) under slats(D) by using 2 bolts

(M), 2 lock washers (N) and 2 flat washers (O). Secure the bolts (M) by using allen wrench (L) in

clockwise direction.（See diagram 2)

Diagram 3

3. Attach slats (D) to side rails (C), align pre-drilled holes on the slat to holes on the cleat of side rail

(C), using screws (J) to tighten both. (See diagram 3)